Modular Features :

HPM series UPS is kind of modular UPS. The product combines the modular design with the N+X parallel redundancy technology. The maximum capacity includes 50KVA and 100KVA which is convenient for flexible configuration. The HPM series UPS incorporates the industry-leading technology and ideas, and have done better in component selection, PCB layout, thermal design, control algorithms, appearance and ect.; the hot-swap technology is used between the module and the enclosure, which greatly reduce the maintenance time for system. It also adopts large touchable LCD and menu design, so all the information about UPS can be monitored through the LCD, which helps to get the operation clearly; each module has both the LCD and LED display, wihich allows the users to get the working status and operating parameters intuitively. The HPM series UPS adopts the advanced DSP digital control technology. Each module uses a separate control panel, so it will easily remove from the UPS system when it is failure, which makes the system more stable and reliable.

◆Digital control

◆19-inch standard cabinet

1.4-meter and 2-meter high cabinets are provided according to the user’s requirement.

◆Modularized design

◆High power-density design

The height of the single module is 3U, a standard 1.4m cabinet can hold 5 pieces

of modules (the maximum power is 20KVA), the whole capacity can reach 100KVA; a standard 2m cabinet can hold 10 pieces of modules (the maximum power is 20KVA), the whole capacity can reach 200KVA.

◆N+X parallel redundancy

This series UPS adopts N+X parallel redundancy design, users can set different redundancy according to the importance of the load.While the number of redundancy modules are more than two, the availability of UPS system will achieve 99.999% and the MTBF will be more than 15,000,000 hours, which can satisfying the reliability requirement of critical load. The UPS redundancy degree can be set through the LCD, when the load exceeds the set value, the UPS will alarm in time.

◆Flexible parallel redundancy setting

This series can set the number of redundancy modules. When the load exceeds the redundancy setting, UPS can still work normally and at the same time send out corresponding warning as long as the load doesn’t exceed the total capacity of modules.

◆Parallel Redundant of the control system

◆Optimizing distributed convergence for the cabinet

◆Separated Bypass

◆Parallel units share battery group

 

◆Optional external battery quantity(16-20pcs)

◆Freely set the charge current

◆Intelligent charging

◆Super-large LCD display (with touchable screen)

◆Single module LCD display

◆Intelligent monitor function

◆Mid or small power distributing system

◆Easy maintenance

◆Short shutdown time when maintenance

◆Centralized monitoring module

◆EPO function